Hard Reset JINGA Basco Neo

JINGA Basco Neo Hard Reset is a device reset to factory settings. This operation deletes all data, settings, passwords and applications in the memory device. Hard Reset operation is most commonly used to repair a damaged or malfunctioning equipment or deletion of user data before the sale. Hard Reset operation will wipe all data, bypass screen lock and restore device software to factory state.

JINGA Basco Neo Hard Reset

How to hard reset JINGA Basco Neo?

  1. In the first step turn off the mobile by holding the Power button for a couple of seconds.
  2. After that start pressing Volume Up and Power keys for a few seconds.
  3. Let go of all buttons if Boot Mode appears.
  4. In this mode select Recovery by using Volume Up to navigate and Volume Down to accept it.
  5. If the Android Robot picture pops up click Volume Up + Power button.
  6. Then use Volume buttons to select wipe data/factory reset and confirm with the Power key.
  7. Now choose yes from the menu and press the Power button once.
  8. Finally select reboot system now by using the Power key.
  9. Good job! The hard reset process will be finished for a few seconds.

Finish! Your device will have the software and set of applications as the moment they leave the factory.

*Take a backup: Before you can use Hard Reset always remember to make copies of your data, because the operation is irreversible and recover previous data and settings will not be possible.

*Caution: Using the Hard Reset is safe and should not cause any damage. However, you need to make sure the device has over 30% battery so the process does not stop halfway.

guest
0 Comments
Inline Feedbacks
View all comments