Hard Reset MyWigo Excite 3

MyWigo Excite 3 Hard Reset is a device reset to factory settings. This operation deletes all data, settings, passwords and applications in the memory device. Hard Reset operation is most commonly used to repair a damaged or malfunctioning equipment or deletion of user data before the sale. Hard Reset operation will wipe all data, bypass screen lock and restore device software to factory state.

MyWigo Excite 3 Hard Reset

How to hard reset MyWigo Excite 3?

  1. If you want to perform Hard Reset operation, you have to turn your MyWigo Excite 3 off, firstly, by holding down Power Key for a few seconds.
  2. When your device it completely off, you have to proceed the Recovery Mode by holding down Power Key + Volume Up for about 5 seconds.
  3. After you see Android robot appears on screen, hold down Power Key and press Volume Up once to proceed.
  4. In Recovery Mode, you have to select option wipe data/factory reset“, using Volume Keys to navigate and Power Key to select.
  5. In the following step, you should select option “Yes — delete all user data”.
  6. Wait for a couple of seconds, till data wipe completes, and after that select option “reboot system now” to exit Recovery Mode.
  7. Your MyWigo Excite 3 will be restarted in a couple of minutes after this and that’s it.

Finish! Your device will have the software and set of applications as the moment they leave the factory.

*Take a backup: Before you can use Hard Reset always remember to make copies of your data, because the operation is irreversible and recover previous data and settings will not be possible.

*Caution: Using the Hard Reset is safe and should not cause any damage. However, you need to make sure the device has over 30% battery so the process does not stop halfway.

guest
0 Comments
Inline Feedbacks
View all comments