Free Download of Firmware (Flash File) for Android 12 on Huawei 80 Pro ANP-TN00: This official firmware comes directly from Huawei. You can use it to update the operating system on your device, fix software issues, remove screen passwords, or restore your device to its factory state.
Download Huawei 80 Pro ANP-TN00 Stock ROM:
Huawei-80-Pro-ANP-TN00_Android12_7.0.0.106_SP6C00E105R2P1
ROM Installation with QFIL:
- Download and Install the Qualcomm USB Driver on your PC. If you’ve already installed the driver, skip this step.
- Download and Extract the Qualcomm Flash Image Loader (QFIL) Tool on your PC.
- After extracting, right-click on “QFIL.exe” and run it as an administrator.
- Connect Your Mobile Device to the PC in EDL Mode:
- Power off your mobile phone.
- Press the Volume Up + Volume Down buttons simultaneously and connect your device to the computer (Ensure your device is in EDL mode before connecting to the PC). Note that some mobile phones may require different key combinations to enter EDL mode.
- Once your mobile device is successfully connected, you’ll see “Qualcomm HS-USB QDLoader 9008” in the QFIL tool. Under “Select Build Type,” choose “Flat Build.”
- Click the “Browse” button and load your device’s stock firmware file (usually .mbn, .elf, or .hex). Follow the on-screen instructions.
- Click “Load XML.” A pop-up window will open; select the “rawprogram0.xml” file and click “Open.”
- Another pop-up window will automatically open; select the “patch0.xml” file and click “Open.”
- Click the “Download” button to start flashing your device.
- The flashing process will begin, and you’ll see a progress bar. Wait for the “Finish Download” dialogue box.
- After the flashing process is complete, you’ll see either “Download Succeed” or “Finish Download” in the QFIL tool. This means you’ve successfully flashed your Qualcomm device using QFIL. Now unplug your device from the computer and wait for 5-10 minutes after the first boot.